How to Choose the Size and Width of Columbia Boots
With Columbia boots, you check the US size and the width separately. First, measure both feet in the socks you will wear with them. Then use the chart on the model page to find the size by length and check the width. Below are two walkthroughs for the Newton Ridge: women's US 8 Wide and men's US 9 Wide.

Measure both feet at home
You will need a sheet of paper, a pencil, and a ruler. Put on the socks you will wear with the boots. For a hiking pair, your usual hiking socks will do.
- Place the sheet on a hard floor right against a wall. Stand with your heel against the wall and shift your weight onto the foot.
- Mark the tip of your longest toe. Measure the distance from the edge of the sheet at the wall to the mark. This is the foot length.
- Mark points on both sides of the widest part of your foot. Measure the distance between them. This is the width.
- Repeat with the other foot. Use the greater length and the greater width for your choice.
Open the Columbia diagrams right at the step you need. The length diagram shows where to mark the longest toe and how to run the ruler from the wall along the foot. The width diagram shows where to put the two side marks at the base of the toes. Measure the distance between them across the foot.
Write down both measurements. If you measured in centimeters and the model chart is in inches, divide each measurement by 2.54. This gives you a number in the same units as on the website.
Find the right row in the Columbia chart
On the model page, click Size Guides. Make sure the chart that opens is for adult men's or women's footwear, whichever you are looking at. It has three useful columns.
| Field | What to do with it |
|---|---|
| Foot Length | Find the row that your foot length falls into. |
| US | Write down the size from that row. This is the size you select on the US website. |
| Foot Width | Check the width in the same size for the Standard option and, if available, Wide. |
It is easier to choose the row by length first. If a standard last usually pinches the front of your foot, check the width in the Wide chart for the same US size. Going up a size changes the length of the boot.
Men's example: Newton Ridge Plus II, US 9 Wide
Say your larger foot measures 26.2 cm in length and 11.0 cm in width. That is about 10.31 and 4.33 inches. In Columbia's men's chart, US 9 Wide lists a length of 10.2–10.4 and a width of 4.2–4.4 inches. Both measurements fit this row.
On the page for the men's Newton Ridge Plus II Waterproof Hiking Boot, there is a Standard / Wide switch. In this example, choose Wide, then 9 and the color you want. The title of the wide version's listing contains the word Wide. After Add to Bag, check the model, color, and size in the cart. If the width is not visible in the cart row, check the option again on the model page.
Women's example: Newton Ridge Plus, US 8 Wide
Say your larger foot measures 24.5 cm in length and 10.2 cm in width. After dividing by 2.54, we get about 9.65 and 4.02 inches. On Columbia's women's chart, the US 8 row fits by length: the range is 9.6–9.7 inches.
In the US 8 Standard row, the width is 3.5–3.7 inches, while for US 8 Wide it is 3.9–4.1. The 4.02 measurement falls into Wide. On the women's Newton Ridge Plus listing, open the Wide option, then choose 8 and a color. Make sure the page shows the women's model.
In these two examples, the US number refers to its own chart. When someone else places the purchase, send them the link and the full description: "women's, US 8 Wide" or "men's, US 9 Wide". If one color is sold out, check the availability of the width you need in another color again.
What to do if your two feet differ
Say one foot measures 25.9 cm and the other 26.2 cm. To choose the row, take 26.2 cm. For width, also use the larger measurement. If the length or width is close to a boundary, measure your foot again while standing: it is important that the marks do not shift and that the pencil is held vertically.
Then open the fit information for the specific model and read reviews from people with a similar foot. The width note is chosen separately from the length. If you are buying boots to wear with winter socks, take your measurements in those socks. Save your measurements in centimeters and inches: they will come in handy if you compare another pair.
How to pass the chosen option to your order
If you are buying yourself, save the link to the version you need and place the order following the Columbia instructions. If Pochtoy will place the purchase, send the link to the boots and label the option, for example US Men’s 9 Wide, Cordovan/Squash. Enter your own size and color based on your measurements.
If the size you chose is not available in the width you need, try another color of the same model or another model with a separate Wide option. For the second model, open its chart and repeat the check.